10pcs – F625ZZ Flange Ball Bearing 5x16x5mm Shielded Chrome Bearings
Description:Single-row, pre-lubricated, normal accuracy.Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance.Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.Selection Guide:Shields (Designation Suffix Z/ZZ) – High speed. Protect from dirt and debris.Sealed (Designation Suffix RS/2RS) – Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.
10 Pcs 6x15x5mm Ball Bearing Double Shielded ABEC-3 Bearings 696ZZ
Ball Bearing Product Details1.Chromium Steel long-life bearings, smooth and low noise2.696z bearings are shielded on BOTH SIDES to keep lubricant in3.696ZZ (I.D.=6mm, O.D.=15mm, Thickness=5mm)4.ABEC Tolerance 3 (P6), Z1 Noise Level for most general use5.Static load rating of 523 newtons and dynamic load rating of 1340 newtons.
8pack V624ZZ V Groove Guide Pulley Bearing 4x13x6mm Rail Ball Bearings Wheel
NOTE：Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product. Description:Single-row, pre-lubricated, normal accuracy.Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.Can be used to build the track system or replace the wheel, widely used in door and window to track, or drive mechanical equipment. Selection Guide:Shields (Designation Suffix Z/ZZ) – High speed. Protect from dirt and debris.
10 Set 2.5mm Ceramic Bearing Balls ZrO2 Zirconium Oxide Ball G5 Precision
Description:-Zirconium Oxide ZrO2 (also known as zirconia) is a material with very low thermal conductivity, high strength and very high resistance to crack propagation.-Used in applications such as precision bearings, pumps and valves, check valves, flow meters, and measurement instruments that operate in aggressive environments.-Specially useful for casters, drawer slides, door locks and many other applications. Suitable for a range of purposes, some of the most common are listed below:-1/8″ is often used for clusters and old English-style headsets-1/4″ is often used for rear wheels and bottom brackets-3/16″ is often used for front wheels-5/32″ is often used for headsets with pressing cups Specification:Size: 2.5mmPrecision: G5Material: Zirconium Oxide (ZrO2)Package Content: 10 Piece .
5pcs – SMR63ZZ Stainless Steel Ball Bearing 3x6x2.5mm Shielded MR63ZZ Bearings
NOTE：Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product. Description:-Single-row, pre-lubricated, normal accuracy.-Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.-With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.-Stainless steel bearing features stronger rust and corrosion resistance ability to withstand caused by humidity and some other media.-Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
5pcs – SCE68 Needle Roller Bearings 3/8″ x 9/16″ x 1/2″ Chrome Steel Open End
Specification:Model: SCE68Drawn Cup Material: SteelCage Material: SteelNeedle Roller Material: Chromium Steel (GCr15)Accuracy: P0Bore Diameter (Fw): 3/8″Outside Diameter (D): 9/16″Width: 1/2″Limit Speed: 25000RPMDynamic Load Rating: 5800NStatic Load Rating: 6600NConstruction : Single RowNumber of Pack: 5 Pcs Description:-They are compact bearings with high load carrying capacity and stiffness.-Suitable for high dynamic loads or radial-limited installation. They are mounted in housings with a tight interference fit.-Used in a variety of applications such as agricultural and construction equipment, pumps and compressors, and two-stroke engines.Note: Use a press or special tool (not a hammer) for installation, as runout may cause local deformation or brittle breakage.
4PCS 8x30x8.5mm Ball Bearing Guide Pulley Roller Double Shielded GCr15
Double Metal Shielded BearingsGeneral Information：[1]Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on[2]bearings are shielded on both sides to keep lubricant in[3]Chromium Steel long-life bearings, smooth and low noise[4]ABEC Tolerance 1 (P0), Z2 Noise Level for most general use[5](I.D.=8mm, O.D.=30mm, Thickness=8.5mm).
513116 Wheel Hub Bearing – 30mm Bore 60mm O.D. 37mm Width
Description:-Wheel bearings can be found in driven front and rear wheels.-They may also be in integral drum designs on the non-driven wheels. Specification:Model: 513116Material: Chrome SteelBore Diameter: 30mmOutside Diameter: 60mmTotal Thickness: 37mm.
10pcs – MF63ZZ Flange Ball Bearing 3x6x2.5mm Full Complement Bearings
NOTE：Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.Description:-Single-row, pre-lubricated, normal accuracy.-Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.-With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.-Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact performance.-Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
2pcs – B1412 Needle Roller Bearings 7/8″x1-1/8″x3/4″ Full Complement Drawn Cup
Specification:Model: B1412Drawn Cup Material: ST14 SteelNeedle Roller Material: Chromium Steel (GCr15)Accuracy: P0Bore Diameter (Fw): 7/8″ / 22.22mmOutside Diameter (D): 1-1/8″ / 28.58mmWidth: 3/4″ / 19.05mmDynamic Load Rating: 5300NStatic Load Rating: 9990NLimiting Speed: 4800RpmNumber of Pack: 2 Pcs Description:-Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.-These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.-Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.