Roller Bearings, Unidirectional Bearing 1/2″ Hole 3/4″ External 7/8″
Descrizione: tracciata Cup il cuscinetto rullini offre un profondo, parete sottile anello esterno. Essi sono i cuscinetti compatto con elevata di carico e rigidità.Questi cuscinetti sono adatti soprattutto per elevati carichi dinamici o radiale-installazione limitata. Essi sono montati con un saldo accoppiamento con interferenza nell’alloggiamento.spalle o gli elastici non sono necessarie per individuare il cuscinetto assialmente, consente quindi di ottenere una semplice ed economica del progetto dell’alesaggio dell’alloggiamento.per varie applicazioni come ad esempio automobili e camion, le trasmissioni di macchine agricole e per le costruzioni, le pompe e i compressori e motori due tempi, tra gli altri.NOTA: Installare con pressa o attrezzi speciali al posto di martello perché battendo può causare la deformazione locale o fragile.
RCB081214 Needle Roller Bearings One Way Bearing 1/2″ Bore 3/4″ OD 7/8″ Width
Specification:Model: RCB081214Drawn Cup Material: ST14 SteelNeedle Roller Material: Chromium Steel (GCr15)Bore Diameter (Fw): 12.7mm / 1/2″Outside Diameter (D): 19.05mm / 3/4″Width: 22.22mm / 7/8″Torque: 7.9N*mNumber of Pack: 1 Pcs Description:-Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.-These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.-Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.-For various applications such as agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.
RCB081214 Needle Roller Bearings One Way Bearing 1/2″ Bore 3/4″ OD 7/8″ Width
Specification:Model: RCB081214Drawn Cup Material: ST14 SteelNeedle Roller Material: Chromium Steel (GCr15)Bore Diameter (Fw): 12.7mm / 1/2″Outside Diameter (D): 19.05mm / 3/4″Width: 22.22mm / 7/8″Torque: 7.9N*mNumber of Pack: 1 Pcs Description:-Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.-These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.-Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.-For various applications such as agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.