4T492A NTN
New in Factory box -4T492A NTN New Taper
492A Timken
New in Factory box -492A Timken New Taper
492A A & S Fersa New Taper
New in Factory box -492A A & S Fersa New Taper
492A3 Timken
New in Factory box -492A3 Timken New Taper
492A NonBranded9
New in Factory box -492A Import Taper
492-A Enduro
New in Factory box -492-A TRB Cup | 495 Series
K492A FAG/Schaeffler Technologies 0 x 133,35 x 22,225 mm TAP. ROLL. SINGLE RO…
The K492A FAG is a cup for a single-row tapered roller bearing. This design enables tapered roller bearings to absorb radial and axial forces (in one direction). The greater the angle between the outer ring and the centre line of the bearing, the greater the axial load capacity.
495/492A A&S – Fersa 82,55 x 133,35 x 30,16 mm TAP. ROLL. SINGLE ROW
The 495/492A A&S – Fersa is a single-row tapered roller bearing. The raceways are conical. This design allows these versatile bearings to accommodate combined loads. They support high radial and axial loads (in one direction).
NTN 492A Tapered Roller Bearing Cup 4 23/32 in Bore 5 1/4 in OD
NTN 492A Tapered Roller Bearing Cup 4 23/32 in Bore 5 1/4 in OD. Condition is New. Shipped with USPS Ground Advantage.
Bower NTN Tapered Roller Bearing, pn 492A
I chose the R16-2RS after checking the shaft size, and you will find that it slides on without fuss.